212 NE 12th St, Moore, OK Mon-Sun: 7:00 am – 7:00 pm
(405) 874-7283
Moore Bathroom Remodeling logo
(405) 874-7283 Free Estimate
Licensed & Insured

Bathroom Remodeling in Moore, OK Built for Clay Soil, Hard Water & Storms

Bathrooms in Moore have a harder life than most. The red clay under your slab swells in May and shrinks by August, and that movement cracks tile and pulls shower pans apart. Hard water leaves a white crust on glass doors within months. Then a hailstorm hits the fan cap on the roof and water starts coming into the ceiling. And if your hall bath doubles as the family's tornado shelter, it has to stay solid. Moore Bathroom Remodeling plans every remodel around these local conditions, from the membrane under the tile to the fan vent on the roof.

We work in 1970s ranch homes in Eastmoor and Old Town Moore, in newer tract homes in Southmoore and the Westmoore area that were rebuilt after 2013, and in compact Tinker-era hall baths in Midwest City and Del City. We also serve Norman, South Oklahoma City, Mustang and Yukon. A 5x7 bath with cast-iron drains needs a different plan than a 2008 primary suite with a dated garden tub, and we plan each one accordingly.

  • Bonded bathroom remodeling contractor
  • Fully insured on every job
  • Financing available for qualified homeowners
Schedule Your Bathroom Consultation See Financing Options (405) 874-7283

After several tornado rebuilds, Moore homeowners know the value of a local contractor who stays accountable. We build our reputation one bathroom at a time with clear pricing, clean job sites and showers that stay watertight through Oklahoma's seasons.

Request Your Free Estimate

No obligation. Fast, honest quotes.

Your information is never shared.

Online Estimates
Onsite Service
Licensed & Insured
Customer Rated
Local Expertise

Why Moore Bathrooms Need a Remodeler Who Knows Central Oklahoma

A bathroom remodel that holds up in Phoenix or Portland can fail here within a few years. Moore's soil, water, weather and housing stock each put their own stress on a bathroom. Here's what we account for before any demolition starts.

Clay Soil, Hard Water and 100°F Swings

Most of Moore sits on red Permian clay with high shrink-swell potential. Rainfall runs about 36–37 inches a year and peaks in May and June. Hot, dry late summers follow, so slab foundations rise and settle every year. That's why we so often find cracked 4x4 tile, split grout lines and shower pans pulling away from the wall. Temperatures add their own strain. July highs sit in the mid-90s, and January lows drop into the upper 20s. In the February 2021 freeze, temperatures stayed below freezing for days and burst supply lines in exterior walls and attic runs across the metro. Moore's moderately hard to hard water, partly drawn from the Garber-Wellington aquifer, scales up glass, aerators and showerheads quickly. We design for all of this with crack-isolation membranes, flexible or epoxy grout, coated glass and plumbing kept out of cold exterior walls.

Housing Stock From Ranch Homes to Post-2013 Rebuilds

Moore grew fastest from the 1960s through the 1980s, and it's mostly single-story brick ranch homes on slabs. Bathrooms from that era usually have one-piece fiberglass tub units, cultured marble tops with built-in bowls, sheet vinyl floors and fans that vent into the attic. Homes from the 1980s and 1990s may still have polybutylene supply lines. Primary baths from the 1990s and 2000s tend to pair a corner jetted garden tub with a cramped stand-up shower. Large parts of central and southwest Moore were rebuilt after the 1999 and 2013 tornadoes, so many newer tract homes still have builder-grade surrounds that are ready for an upgrade. Nearby Midwest City and Del City add 1940s–60s hall baths with galvanized lines, cast-iron drains and pink or green period tile.

Permits, Trade Licensing and Code Requirements

Oklahoma doesn't license general contractors. Plumbing, electrical and mechanical work must be done by trades licensed through the Oklahoma Construction Industries Board, and those trades pull the permits. The City of Moore's Community Development department requires permits and inspections for plumbing, electrical, mechanical and structural changes. Oklahoma City, Norman and Midwest City each run their own permitting. Code calls for GFCI-protected receptacles, a dedicated 20-amp circuit, exhaust fans vented outdoors, anti-scald shower valves and safety glass. Homes built before 1978 fall under the EPA's lead-safe RRP rules. Historic districts such as Heritage Hills, Mesta Park and Norman's Miller district may need approval for exterior vent changes. HOAs in Southmoore-area subdivisions mainly set rules for dumpsters, parking and work hours.

Families, Veterans and Homeowners Aging in Place

Moore had about 62,800 residents at the 2020 Census. Most homes are owner-occupied, and homeowners here are careful with their money. Tinker Air Force Base, the FAA Mike Monroney Center, OU and Norman Regional are all close by, so the area has many military families, retirees and multigenerational households. That drives steady demand for tub-to-shower conversions, curbless entries and grab bars. Younger families buying older ranch homes usually want the hall bath updated first. Because home values here run below national averages, clear pricing and financing matter as much as the design.

Know The Signs

Common Bathroom Problems We See in Moore and the OKC Metro

Most bathroom remodels here don't start with a Pinterest board. They start with a crack, a leak or a stain that keeps coming back. These are the problems we find most often in Moore-area homes, why local conditions cause them, and how we fix them for good.

Hidden Leaks Behind Failing Shower Pans and Surrounds

Serious

Water gets past cracked grout, a separated pan or a failed seam in a fiberglass unit and soaks the subfloor, the slab edge or the wall framing. It can go on for months with nothing showing, and by the time you notice, the damage is usually well beyond the shower.

Why it happens here

Clay soil movement under Moore's slab homes flexes the floor every year, and that stress lands on shower pans and tile corners. In 1970s–80s homes, original fiberglass units are now 40 to 50 years old and the seams are brittle. Tiled showers built without a continuous waterproofing membrane depend on grout alone, and grout isn't waterproof. Add hard water etching the joints and daily use, and slow leaks are one of the most common reasons homeowners call us.

Signs to watch for
  • Soft or spongy floor near the tub or shower
  • Baseboards swelling or paint bubbling on the other side of the wall
  • Musty smell that cleaning doesn't remove
  • Loose or hollow-sounding tiles
  • Dark grout lines that never dry out
  • Stains on the ceiling below a second-floor bath
Local patterns

We see this most in 1970s–80s ranch homes in Eastmoor and Old Town Moore, and in 1990s tract homes where builders used minimal pan liners. Leaks often show up after a wet spring followed by a dry summer, once the slab has moved.

Our fix

Tear out to studs and slab, dry and treat the framing, then install a fully bonded waterproofing system with a correctly sloped pan. Tile goes on over a crack-isolation membrane.

Cracked Floor Tile and Split Grout From Slab Movement

Moderate

Straight or stair-step cracks that run across several tiles, grout lines that open up, and tiles that pop loose. It's the floor showing the foundation movement underneath, and patching it rarely lasts more than a season.

Why it happens here

Moore's red Permian clay swells when it's wet and shrinks when it's dry. A wet May and June followed by a 100°F August can move a slab noticeably. Rigid ceramic tile set directly on concrete has no give, so the cracks carry straight through to the surface. Many older installs used thin-set without any isolation layer, and builder-grade sanded grout cracks as soon as the slab moves.

Signs to watch for
  • Hairline cracks running across several tiles
  • Grout crumbling or pulling away along a line
  • Tiles that sound hollow when tapped
  • Doors that stick or rub at certain times of year
  • Gaps opening between the floor and the tub or vanity
  • Toilet that rocks or keeps loosening
Local patterns

Common throughout Moore's slab-on-grade subdivisions, including the Plaza Towers/Briarwood area and Southmoore, and in South OKC near Earlywine. Cracks usually show up or get worse from late summer into fall.

Our fix

Install an uncoupling or crack-isolation membrane, use flexible or epoxy grout with movement joints, and choose large-format porcelain that handles minor slab movement better.

Attic-Vented Exhaust Fans and Mold Growth

Moderate

A bath fan that dumps moist air into the attic instead of venting it outside, or a fan that's too small for the room. Steam condenses on the ceiling, in the insulation and behind the surround, and mold starts growing there.

Why it happens here

Fans in many 1970s–80s Moore homes were never ducted to a roof or soffit cap. Our humidity also swings hard, from closed-up AC summers to dry heated winters, so moisture condenses easily in a cold attic. Spring hail and wind-driven rain also damage fan caps, so water can run back down the duct. Current code requires outdoor venting, so this gets corrected as part of any permitted remodel.

Signs to watch for
  • Black spotting on the ceiling or around the fan
  • Mirror and walls stay fogged long after a shower
  • Peeling paint on the ceiling
  • Damp or matted insulation above the bathroom
  • Rusty fan grille or water dripping from the fan
  • Musty smell in the hallway or attic
Local patterns

Common in original-owner homes in Eastmoor, Old Town Moore, Midwest City and Del City. It spikes after May hailstorms damage roof caps, and in winter when warm, moist air hits a cold attic.

Our fix

Install a properly sized, quiet exhaust fan ducted to a sealed exterior cap, with a humidity-sensing or timer switch. We remove mold and replace drywall where needed.

Burst or Failing Supply Lines (Polybutylene, Galvanized, Exterior Walls)

Emergency

Supply piping that's at the end of its life or sits where it can freeze. That includes polybutylene in 1980s–90s homes, corroded galvanized steel in 1940s–60s homes, and lines run through exterior walls or the attic. Any of them can fail suddenly and flood the room.

Why it happens here

The February 2021 freeze kept the metro below freezing for days and burst pipes in exterior walls, slab penetrations and attic runs all over the area. Polybutylene breaks down from the inside with age and chlorinated water. Galvanized pipe in Tinker-era homes rusts shut and cuts water pressure. Many of these lines run through cold walls, so the next arctic outbreak puts them at risk again.

Signs to watch for
  • Gray, flexible plastic supply lines (polybutylene)
  • Low water pressure or rusty-colored water
  • Water stains on exterior-wall drywall
  • Pipes that froze in a past cold snap
  • Green or white crust on fittings
  • Unexplained jump in the water bill
Local patterns

Polybutylene shows up in 1980s–90s Moore and South OKC subdivisions. Galvanized pipe is common in Midwest City near Tinker AFB and in Del City. Freeze-related failures cluster in shower valves on exterior walls and attic runs.

Our fix

Shut off and stabilize the leak, then repipe the bathroom with PEX or copper and move lines away from cold exterior walls. Valves get insulated and become accessible.

Hard Water Scale on Glass, Fixtures and Grout

Minor

White, chalky mineral deposits that build up on shower glass, showerheads, faucet aerators and dark tile or fixtures. Over time the scale etches the glass permanently, clogs spray nozzles and wears out cartridges and valves early.

Why it happens here

Water across the Moore and OKC metro is moderately hard to hard, and Moore has historically blended in well water from the Garber-Wellington aquifer. Acreage homes in Noble, Choctaw and Blanchard that run on private wells often have even harder water. Every shower leaves a fresh layer of minerals. Uncoated glass and porous grout hold onto that layer, so homes that skip water-conscious material choices often have cloudy glass within a year.

Signs to watch for
  • Cloudy shower glass that won't come clean
  • Showerhead spraying unevenly or sideways
  • White spots on matte black or bronze fixtures
  • Crusty buildup on faucet aerators
  • Stained, rough grout lines
  • Valves that stick or drip
Local patterns

Seen everywhere in the metro, but worst in well-water homes in Noble, Choctaw and Blanchard and in Moore homes that don't have softeners. Dark tile and matte black finishes popular in new Mustang and Yukon builds show it fastest.

Our fix

Specify factory-coated glass, quartz or solid-surface walls, large-format porcelain with fewer grout lines, sealed or epoxy grout and finishes that resist mineral buildup.

Unsafe Tubs for Aging or Limited-Mobility Homeowners

Serious

A standard 14–20 inch tub wall, a slippery floor, no grab bars and a narrow doorway can make an ordinary bathroom the most dangerous room in the house. That's especially true for older adults, veterans with injuries and anyone recovering from surgery.

Why it happens here

Many Moore owners who bought in the 1970s and 1980s are aging in place in the same ranch homes. With Tinker AFB nearby, there are a lot of retired military households, and multigenerational living is common across the metro. The original tub/shower combos and 24-inch doors in these homes weren't built with accessibility in mind, so tub-to-shower conversions are one of the most requested projects we do.

Signs to watch for
  • Difficulty stepping over the tub wall
  • Holding onto towel bars or the vanity for balance
  • A near-fall or slip in the bathroom
  • Needing help to bathe safely
  • Toilet too low to stand from easily
  • Doorway too narrow for a walker or wheelchair
Local patterns

Concentrated in established Moore neighborhoods like Eastmoor and Old Town, in Midwest City and Del City near Tinker, and in households with multiple generations. Requests often come after a hospital stay or a fall.

Our fix

Convert the tub to a low-threshold or curbless walk-in shower with blocked-in grab bars, a handheld wand, a bench and a comfort-height toilet. Widen the doorway where the framing allows.

Dated Layouts: Garden Tubs, Tiny Showers and 5x7 Hall Baths

Minor

These rooms work, but they don't work well. A jetted corner tub nobody uses takes up a third of the primary bath. A 32-inch stand-up shower feels cramped. A 1950s hall bath has no storage. Layout problems keep coming up every time you use the room.

Why it happens here

Builders in the 1990s and 2000s put corner jetted garden tubs and small showers in almost every primary bath in Moore, Norman and South OKC. Many owners now want those jetted tubs taken out and replaced with large walk-in showers. Post-war Midwest City and Del City homes have compact 5x7 baths with cast-iron drains. Many families also want the interior bath kept windowless and solidly built because it's their tornado shelter.

Signs to watch for
  • Jetted tub used for storage or not used at all
  • Shower too small to turn around in comfortably
  • No counter space or linen storage
  • Pink, green or 4x4 white tile and cultured marble tops
  • Builder-grade vanity at 30-inch height
  • Lighting that's dim or casts shadows
Local patterns

Garden-tub layouts are common in Westmoore, Southmoore and Brookhaven in Norman. Tight 5x7 hall baths are typical in Midwest City and Del City. Builder-grade baths are common in post-2013 rebuilds in central Moore and in new Mustang and Yukon subdivisions.

Our fix

Reconfigure within the existing footprint where possible. That can mean removing the garden tub for an oversized walk-in shower, using smarter vanity and storage choices, and adding layered lighting, all with the plumbing correctly re-sloped.

What We Do

Bathroom Remodeling Services for Moore-Area Homes

Our services range from a one-day shower update to a full primary suite rebuild. Every project is matched to what your home actually needs. Moore conditions are built into each plan, including crack-isolation under tile, outdoor-vented fans, hard-water-friendly surfaces and plumbing kept out of freeze-prone walls.

Complete Bathroom Remodeling

We take the bathroom down to studs and slab and rebuild it. That includes layout, plumbing, electrical, ventilation, waterproofing, tile, vanity, fixtures, lighting and finishes, all managed by one point of contact from design through final inspection.

Our approach

We start with a moisture and condition assessment. Permitted trade work is handled by CIB-licensed plumbers and electricians. Showers get bonded waterproofing systems, floors get uncoupling membranes, and every fan is ducted outdoors.

In Moore, OK

In 1970s–80s Moore ranch homes, a full remodel is often the right time to replace polybutylene lines, correct an attic-vented fan, and add the GFCI protection and dedicated 20-amp circuit that current code requires. We also make sure the new tile can handle clay-soil movement.

Best for

Homeowners with dated, leaking or poorly laid-out bathrooms who want a lasting fix rather than another cosmetic patch.

Shower Remodeling & Installation

We build new walk-in, tiled, acrylic or solid-surface showers, with niches, benches, frameless or semi-frameless glass, and anti-scald pressure-balancing or thermostatic valves.

Our approach

Every shower gets a sloped pan and a continuous waterproofing membrane. We recommend coated safety glass and large-format panels with fewer grout lines, so there's less surface for hard water to scale.

In Moore, OK

Moore's hard water and shifting slabs are hard on showers. Coated glass, epoxy grout and flexible membranes help a new shower stay watertight and easy to clean through Oklahoma's seasonal soil movement.

Best for

Anyone with a cracked, leaking, cramped or scale-stained shower who wants a cleaner, safer and more spacious one.

Small Bathroom Remodel

We get more function out of compact hall and guest baths with space-saving vanities, recessed storage, better lighting, larger-format tile and smarter fixture placement.

Our approach

We start by measuring what you have, then look at wall-hung or slim-depth vanities, pocket doors, recessed medicine cabinets and glass panels in place of shower curtains, so the room feels bigger without moving walls.

In Moore, OK

Midwest City and Del City homes near Tinker AFB often have 5x7 baths with cast-iron drains and galvanized lines. We replace that failing plumbing while modernizing the room, so you don't have to open the walls twice.

Best for

Hall baths, kids' baths and guest baths in post-war and 1970s homes where every inch counts.

Bathroom Renovation Services

These are targeted updates when you don't need a full gut job: new vanity and top, flooring, fixture swaps, lighting, paint, mirrors, and fan replacement or rerouting.

Our approach

We start by checking what's sound and what isn't, especially the subfloor, the supply lines and the fan venting, so the money goes to upgrades that will last rather than cosmetics laid over hidden problems.

In Moore, OK

Common in post-2013 rebuilds in central Moore and in newer Norman and Newcastle homes, where the structure and plumbing are in good shape but the builder-grade finishes look dated.

Best for

Homeowners with structurally sound bathrooms who want a fresh look and better function on a moderate budget.

Specialty

Tub to Shower Conversion

We remove an unused or hard-to-step-over tub and replace it with a walk-in shower. Options include low-threshold or curbless entries, grab bars, built-in benches and handheld sprayers.

Our approach

Because these homes sit on slabs, we re-slope the drain or relocate it, sometimes after a camera inspection of the line. The pan is waterproofed and the walls are blocked for future grab bars. Safety glass or an open entry finishes the shower.

In Moore, OK

This is our most requested accessibility project for Moore residents aging in place, military retirees near Tinker and multigenerational households. It also works well for swapping out 1990s corner garden tubs in Westmoore and Norman homes.

Best for

Seniors, people with limited mobility, busy families who rarely use the tub, and anyone planning to stay in their home long-term.

Specialty

One Day Bathroom Remodel

We replace a worn tub, shower or surround with a custom-fit acrylic or solid-surface system, usually installed in a single day, so your only bathroom isn't out of service for weeks.

Our approach

We measure and order ahead of time, then install seamless, grout-free wall panels with matching bases and fixtures. When an old fiberglass unit has to come out, we inspect the wall behind it before the new system goes in.

In Moore, OK

Grout-free walls are a good fit for Moore's hard water because there are no joints to scale or stain. This option suits families with one full bath and busy households across Moore and South OKC.

Best for

Homes with a sound structure that need a fast, low-maintenance tub or shower update and minimal downtime.

Quick Bathroom Renovation

A short, tightly scheduled refresh that usually covers vanity, top, faucet, toilet, lighting, flooring and paint, finished in days rather than weeks.

Our approach

We pick materials before work starts, keep the plumbing in its current locations and schedule the trades back to back to keep downtime short. Any permit-required electrical or plumbing work is still handled properly.

In Moore, OK

Popular with homeowners getting ready to list in Moore's active resale market, and with buyers of older ranch homes who want the hall bath usable right after closing.

Best for

Pre-sale updates, rental turnovers and new owners who want a fast, budget-friendly improvement.

Master Bathroom Remodel

A full primary-suite redesign that can include oversized walk-in showers, double vanities, freestanding or soaking tubs, heated floors, upgraded lighting and better storage.

Our approach

We design the layout and select materials together, model the drain slopes for the slab, add crack-isolation under large-format tile and size the ventilation for the larger room.

In Moore, OK

A popular update in Southmoore, Westmoore, Brookhaven and newer Mustang, Yukon and Newcastle homes, where the 1990s–2010s builder layout puts a corner jetted tub next to a small stand-up shower.

Best for

Homeowners who want a spa-style primary bath and plan to stay in the home for years.

Half Bath Remodel

We update powder rooms and half baths with a new vanity or pedestal sink, toilet, flooring, lighting, mirror and wall finishes.

Our approach

Most projects keep the existing plumbing locations to control cost. We also check the supply stops and wax ring, and look for a slow leak at the toilet flange, which is common where slabs shift.

In Moore, OK

Guests see the half bath more than any other bathroom. In Moore's family homes it's a quick, high-impact project, often paired with a hall or primary bath remodel.

Best for

Homeowners who want a quick, affordable update to a high-traffic guest bathroom.

Simple & Transparent

Our Bathroom Remodeling Process, Step by Step

You'll know what happens next at every stage. Here's how a typical Moore bathroom remodel moves from the first phone call to the final walkthrough.

Consultation & In-Home Assessment

  • Walk through the bathroom and talk about how you use it
  • Check for soft floors, leaks, cracked tile and fan venting
  • Identify polybutylene, galvanized or cast-iron plumbing
  • Take measurements and photos for design

We look for signs of slab movement and attic-vented fans, and we ask whether the room serves as your storm shelter.

Usually scheduled within a few days of your call; visit takes 45–90 minutes

Design, Selections & Written Proposal

  • Lay out fixture placement and the shower design
  • Choose tile, surfaces, glass and fixtures
  • Provide an itemized written proposal
  • Review financing options if you want them

We recommend coated glass and low-maintenance surfaces for hard water, and flexible membranes for clay-soil slabs.

About 1–2 weeks

Permits & Scheduling

  • Coordinate plumbing, electrical and mechanical permits with CIB-licensed trades
  • Confirm material lead times
  • Set the start date and work hours
  • Notify the HOA if needed for dumpster or parking

Moore, Oklahoma City, Norman and Midwest City each have their own permit offices and inspection schedules. Homes built before 1978 are handled under lead-safe RRP practices.

About 1–3 weeks depending on the city

Demolition & Construction

  • Protect floors and seal off the work area to control dust
  • Demolish and inspect the framing, slab and drains
  • Complete rough plumbing, electrical and fan ducting, then rough inspections
  • Install waterproofing, tile, fixtures and finishes

If a drain has lost slope, we may camera-inspect the line under the slab. We move supply lines out of cold exterior walls whenever possible.

1 day for one-day systems; 1–2 weeks for most hall baths; 3–5 weeks for primary suites

Final Inspection & Walkthrough

  • Pass city final inspections
  • Clean up the work area
  • Walk through the finished bathroom with you
  • Explain care for glass, grout and fixtures in hard water

We show you the shutoff valves and explain how to keep the new fan and glass performing in Oklahoma's humidity swings.

1–2 days
The Moore Bathroom Remodeling Difference

Why Moore Homeowners Choose Moore Bathroom Remodeling

We Build for Moore's Soil, Water and Weather

A bathroom that ignores local conditions won't last here. Red clay under slab homes moves every year, so we use crack-isolation and uncoupling membranes, flexible or epoxy grout and properly sloped, fully waterproofed shower systems. Hard water scales glass and fixtures, so we steer you toward coated glass, quartz, solid-surface walls and large-format porcelain. After the 2021 freeze, we move supply lines out of exterior walls whenever we can. These choices cost little up front and save you from tearing the room out again in five years.

Bonded and Insured for Your Protection

Moore Bathroom Remodeling is bonded and insured. If something unexpected happens on your property during the project, you're protected. That matters in a town where tornado rebuilds brought in out-of-area contractors who disappeared once the work dried up. On permitted plumbing, electrical and mechanical work, we follow Oklahoma's requirement that trades licensed through the Construction Industries Board handle and permit that work. You'll know who's in your home and that the work is done the way the law requires.

Bathroom Specialists, Not Generalists

We don't build decks one week and roofs the next. We focus on bathrooms: full remodels, walk-in and tiled showers, tub-to-shower conversions, bathtub replacement, Jacuzzi and garden-tub removals, one-day systems and accessibility upgrades. Because we focus on one room, we know where bathrooms fail. That includes the shower pan corner, the toilet flange on a shifting slab and the fan that's been venting into the attic since 1978. We check those spots on every job.

Accessibility and Aging-in-Place Expertise

Many Moore, Midwest City and Del City homeowners want to stay in the houses they've owned for decades, and military retirees and multigenerational families often need bathrooms that work for everyone. We design low-threshold and curbless showers, install blocking for grab bars, add benches and handheld sprayers, set comfort-height toilets and widen doorways where the framing allows. The goal is a bathroom that's safe without looking like a hospital room.

Clear, Itemized Pricing and Financing Options

Moore homeowners are careful with their money, and they should be. Your proposal breaks out labor, materials and permit-related costs so you can see where the money goes and adjust the selections to fit your budget. If a project makes more sense spread over time, financing is available for qualified homeowners. We'll explain the options without pressure, so you can choose between a one-day update and a full remodel based on what's right for your home.

Fast Options When You Can't Wait

Not every bathroom needs a month of demolition. Our one-day bathroom remodels and quick renovations get a worn tub, shower or vanity replaced with very little downtime, which matters when you only have one full bath. When the project is bigger, we schedule the trades back to back and give you a realistic timeline up front, including permit and inspection steps with the city.

Local Coverage Across a 20-Mile Radius

We serve homes within about 20 miles of Moore, including Oklahoma City, Norman, South OKC, Midwest City, Del City, Mustang, Yukon, Newcastle and the rural edges toward Noble, Choctaw and Blanchard. Each area has its own housing stock and its own permit office. We know Tinker-era hall baths, post-2013 Moore rebuilds and acreage homes on hard well water, and we plan each remodel to fit the house.

Trusted Locally

A Local Bathroom Remodeler Moore Homeowners Can Count On

After several tornado rebuilds, Moore homeowners know the value of a local contractor who stays accountable. We build our reputation one bathroom at a time with clear pricing, clean job sites and showers that stay watertight through Oklahoma's seasons.

20-Mile
Service Radius Around Moore
15
Metro Communities Served
9
Bathroom Remodeling Services
1-Day
Remodel Options Available
BondedInsuredFinancing Available
Where We Work

Bathroom Remodeling Service Areas Around Moore, OK

We're based in Moore and work throughout the central Oklahoma metro within about 20 miles. Each part of the metro has its own housing stock, from post-war hall baths to brand-new builder-grade suites, and we plan every remodel to fit the home.

Moore & the I-35 Corridor

MooreSouth Oklahoma CityNormanNobleOklahoma City

East Metro & Tinker AFB Area

Midwest CityDel CityChoctaw

West Metro & Canadian County

MustangYukonNewcastleTuttleBlanchardBethany & Warr Acres

We serve homes within roughly a 20-mile radius of Moore. If you're near the edge of that range, contact us and we'll confirm whether your address is covered. Not sure if we cover your area? Call (405) 874-7283.

Transparent Pricing

How Much Does a Bathroom Remodel Cost in Moore, OK?

Bathroom remodeling costs in the Moore and OKC metro depend on the size of the room, how much plumbing moves and what's hidden behind the walls. These ranges reflect typical local projects. Your written proposal will be itemized for your specific bathroom.

Primary Factor

Scope: Refresh vs. Full Gut

The biggest cost driver is whether we're replacing surfaces or taking the room to studs and slab. A vanity, toilet and flooring refresh costs a fraction of a full remodel. A complete remodel adds demolition, waterproofing, new tile, upgraded electrical and permits. One-day acrylic systems fall in between. They replace the tub or shower area quickly without the labor of a custom tiled build.

Primary Factor

Plumbing Changes on a Slab

Most Moore homes sit on slab foundations, so moving a drain means cutting concrete, trenching and re-sloping the line, then patching the slab. Converting a garden tub to a walk-in shower or relocating a toilet can add $1,500 to $5,000 or more. Replacing polybutylene or galvanized supply lines, or moving lines out of freeze-prone exterior walls, adds cost but heads off a much more expensive emergency later.

Major Factor

Shower Type and Materials

A custom tiled shower with a bonded waterproofing system, a niche, a bench and frameless coated glass costs considerably more than an acrylic or solid-surface surround. Tile choice matters too. Large-format porcelain and quartz cost more up front but have fewer grout lines and stand up better to hard water. Glass alone can run from several hundred dollars for a framed door to $1,500–$3,500 or more for heavy frameless enclosures.

Variable Factor

Hidden Damage and Code Upgrades

Older bathrooms often hide rotted subfloor, mold behind fiberglass units, a fan venting into the attic or missing GFCI protection. Correcting these brings the room up to current code, including a dedicated 20-amp circuit, outdoor-vented fans and anti-scald valves. Pre-1978 homes in Midwest City, Del City and older Moore may also need lead-safe work practices. We point out likely issues at the assessment so they're less of a surprise.

Optional Factor

Accessibility Features

Curbless entries, grab bar blocking, benches, handheld sprayers, comfort-height toilets and wider doorways add function and safety. Curbless showers on a slab often need the floor recessed or the drain reworked, so they cost more than a low-curb walk-in shower. Simple additions like blocking and grab bars cost little if they go in during the remodel.

Typical projectDetailsEstimated range
Half Bath RefreshPowder room in a Moore ranch home: new vanity, toilet, LVP or tile floor, lighting, mirror and paint; plumbing stays in place$3,500 – $9,000
One-Day Tub or Shower ReplacementRemove a worn fiberglass tub/shower unit and install a custom-fit, grout-free acrylic system with new valve and fixtures$6,500 – $13,000
Tub-to-Shower ConversionHall bath in Eastmoor or Midwest City: remove the tub, re-slope the drain, install a waterproofed low-threshold tile or solid-surface shower with grab bar blocking and safety glass$9,000 – $18,000
Master Bathroom RemodelSouthmoore or Norman primary suite: remove the corner garden tub, build an oversized tiled walk-in shower, double vanity, quartz tops, new lighting and outdoor-vented fan$25,000 – $55,000+

Financing is available for qualified homeowners, so you can spread the cost of a remodel into manageable payments. Ask about options during your consultation. A well-built bathroom remodel improves daily comfort and safety, and it removes common inspection issues like leaks and attic-vented fans. It also stands out to buyers in Moore's value-conscious resale market, and when it's designed for local conditions, you won't be paying to redo it in a few years.

Schedule a Free Estimate
Questions & Answers

Bathroom Remodeling FAQs for Moore, OK Homeowners

How much does a bathroom remodel cost in Moore, OK?

Most Moore-area bathroom remodels fall between about $6,500 and $55,000, depending on scope. A half bath refresh often runs $3,500–$9,000. A one-day tub or shower replacement usually lands around $6,500–$13,000. A full hall bath remodel or tub-to-shower conversion is typically $9,000–$18,000, and primary suites with large tiled showers can run $25,000–$55,000 or more. The biggest variables are moving plumbing in a slab foundation, the shower materials you choose and hidden damage like rotted subfloor. You'll get an itemized written proposal before any work begins, and financing is available.

How long does a bathroom remodel take?

It depends on the project. One-day bathroom remodels replace a tub or shower system in about a day. Quick renovations, meaning vanity, floor and fixtures without moving plumbing, usually take a few days. A full hall bath remodel generally takes one to two weeks of on-site work, and a primary bathroom often takes three to five weeks. Before work starts, plan on one to two weeks for design and selections and one to three weeks for permits, depending on whether you're in Moore, Oklahoma City, Norman or another city. Inspections are part of the timeline too.

Do I need a permit to remodel my bathroom in Moore?

Often, yes. The City of Moore requires permits for plumbing, electrical and mechanical work, structural changes like moving walls, and some fixture relocations, followed by inspections. Swapping a vanity or flooring usually doesn't need one. Oklahoma doesn't license general contractors, but plumbing, electrical and mechanical work must be done by trades licensed through the Construction Industries Board, and those trades pull the permits. Oklahoma City, Norman and Midwest City each have their own permit offices. If your home was built before 1978, lead-safe RRP rules apply, and historic districts may require approval for exterior vent changes.

Why does the tile in my bathroom keep cracking?

In Moore, the usual cause is the soil, not the tile. Our red clay swells during wet springs and shrinks during hot, dry summers, so slab foundations move slightly every year. Rigid tile set directly on concrete can't absorb that movement, and the cracks show up at the surface. Regrouting only buys you a season or two. The lasting fix is to install an uncoupling or crack-isolation membrane under the new tile, use flexible or epoxy grout with proper movement joints, and choose large-format porcelain. If a drain has lost slope, we may also camera-inspect the line under the slab.

Is a tub-to-shower conversion worth it, and will it hurt resale?

For most households here, it's worth it. If you rarely use the tub, or if stepping over it is getting harder, a walk-in shower is safer and easier to clean, and it makes better use of the space. That's why it's so popular with Moore homeowners aging in place and with military retirees near Tinker. For resale, it's generally smart to keep at least one tub in the house for buyers with young children. Converting the primary bath while keeping a tub in the hall bath usually works well. We can also add grab bar blocking so the shower can adapt later.

How can I prevent hard water damage in my new bathroom?

Start with material choices. Moore's water is moderately hard to hard, and well-water homes in Noble, Choctaw and Blanchard are often harder still. Choose factory-coated shower glass, quartz or solid-surface walls, and large-format tile so there are fewer grout lines to scale. Seal grout or use epoxy grout. Finishes like polished chrome show spotting less than matte black. Squeegee the glass after showers and clean aerators and showerheads every few months. A whole-house water softener makes a big difference, and we can plan the remodel so it works well with one.

When should I stop putting off a bathroom remodel?

Act soon if you notice a soft or spongy floor near the tub, loose or hollow-sounding tiles, a musty smell that won't go away, ceiling stains or bubbling paint on the other side of a shower wall. These usually mean water is getting behind the surface, and the damage grows every month you wait. You should also act if you have polybutylene or corroded galvanized supply lines, if pipes froze in a past cold snap, or if someone in your home is having trouble getting in and out of the tub safely. Cosmetic updates can wait. Leaks and safety risks shouldn't.

Can you remodel my bathroom without affecting its use as a tornado shelter?

Yes. Many Moore families treat an interior, windowless bathroom as their shelter room, and we take that into account in the design. We can keep the room windowless, keep or strengthen solid wall construction, and plan the layout so the room is still easy to get into quickly. If you have an in-garage or in-ground storm shelter, we'll make sure the remodel doesn't interfere with access to it. A remodeled bathroom isn't a certified safe room, so if you want FEMA-rated protection, a dedicated shelter is still the best choice. We'll work around one if you have it.

Find Us

Serving Moore, OK & Nearby

212 NE 12th St, Moore, OK, 73160

Get Driving Directions
Ready When You Are

Start Your Moore Bathroom Remodel Today

Whether you need a one-day shower update, a safer walk-in shower or a full primary suite, we'll give you a clear plan built for Moore's clay soil, hard water and weather.

Request a Free Estimate Call (405) 874-7283
  • In-home assessment of leaks, slab movement, venting and plumbing
  • Itemized written proposal with no vague allowances
  • Designs built for Moore's clay soil and hard water
  • Bonded and insured protection on every project
  • Financing available for qualified homeowners
  • Permitted trade work coordinated as Oklahoma law requires
  • One-day and quick-turnaround options to minimize downtime

Serving Moore, Oklahoma City, Norman, South OKC, Midwest City, Del City, Mustang, Yukon, Newcastle, Noble, Choctaw, Tuttle, Blanchard, Bethany and Warr Acres, all within about 20 miles of Moore.

Got an active leak from a burst supply line or failed shower valve? Shut off the water at the main and call us right away, so we can stop the damage and plan the repair.

Bonded · Insured

Moore Bathroom Remodeling Free estimates across Moore, OK
Free Estimate Call (405) 874-7283